The electric furnace is equipped with a ventilator device and a wind guide system, so that the furnace temperature uniformity is controlled within ± 5 ° C to ensure that the workpiece is uniformly heated.
The temperature control system can adopt PID zero-crossing trigger thyristor, high-precision intelligent meter temperature control, high temperature control accuracy, and good furnace temperature stability. Position control is also available.
Conditions of Use
1. Indoor use;
2. The relative humidity within the range of -5 to 40 ℃ is not more than 85%, and the monthly average temperature of the month is not higher than 30 ℃;
3. There is no conductive dust, explosive gas and corrosive gas that can seriously damage metals and insulation;
4, no obvious vibration and bumps;
After-sales service and commitment
After the furnace is qualified for delivery and commissioned, it enters the warranty period, which is 12 months. Regardless of the warranty period or after the warranty period, if the furnace fails, we promise to send someone to the site for processing within 36 hours after receiving the notification.
Failures caused by our cause during the warranty period, we perform unconditional repairs and replacements. For failures caused by other reasons, we carry out paid repairs at a cost.
After the warranty period, we will, as always, do a good job of after-sales service, so that users have no worries.
For more equipment technical information and solutions, please contact professionals, hotline: 400-618-5717