捕鱼大作战

Product introduction of trolley vacuum furnace
The trolley-type vacuum furnace adopts non-standard design due to the special requirements of user products. This furnace is mainly composed of furnace body, furnace lining, furnace tank and pre-evacuation device, furnace car, furnace car transmission mechanism, electric heating device, temperature control and The main part of the recording system. 1. The furnace body and furnace lining are all-fiber structure, constructed of high-quality refractory fiber, using standard riveting hardware and scientific and reasonable mounting methods. The fiber folding block is pre-compressed again before installation (compression volume ≥230Kg / m3). It is fixed on the shell with rivets, and the thickness of the insulation material is ≮240mm. The structure has excellent chemical stability, thermal stability, thermal shock resistance, excellent tensile strength and corrosion resistance with low thermal conductivity and low hot melt. The highest temperature resistance of the fiber is 1200 ° C. After the lining is manufactured, a layer of high-temperature curing agent is sprayed on the surface to form a layer of thermal insulation wall, which increases the strength and heat radiation performance of the lining body surface, and further reduces the heat loss of the lining body animal, and achieves the effect of rapid heating to the maximum Improve the thermal efficiency of the furnace.

2. Steel structure: The steel skeleton is welded by section steel and steel plate. The whole is strong, firm, durable, and reliable. All welds are even and smooth, and there are no defects such as pores, slag inclusion, and non-fusion. The appearance of the furnace body is straight and beautiful, without wrinkles or unevenness. The outside of the furnace body is brushed with primer and finish according to relevant standards. The color standard is selected according to the industry standard (or the color specified by the user). The key temperature-resistant parts are to use the medium-temperature resistant paint. The outer sealing plate is uniformly sealed with a cold rolled plate ≤3mm thick. The sealing plates are all fixed with large cap screws, which is convenient for partial disassembly and maintenance, and the overall appearance is beautiful.

3. The connection from the control cabinet to the main circuit of the furnace body uses copper-core rubber wire; the terminal chuck of the lead-out rod is chrome-plated after the steel plate is finished; all the wire number logos are made of special wire number materials, which are regularly printed to avoid wires No. comes off; all the lines in the trench are marked with a line number every two meters, which is convenient for checking each line during maintenance.

Technical Parameters:

For more equipment technical information and solutions, please contact professionals, hotline: 400-618-5717

Previous: Trolley hot air circulation furnace

Next: 25 × 5.5 × 5.5m trolley gas stove

Keyword: Trolley type vacuum furnace

QQ Online Consulting
Online consultation
在线咨询